Application Scenarios
Sealing protection for fibre optic and telecom cable joint closures, including groove sealing for cable splice enclosures.
Product Performance Table
| Available Models | KCMFD | KCMFT |
|---|---|---|
Dimensions (T x W x L or D x L) | 2.0 mm x 50 mm x 1,200 mm (0.079" x 1.969" x 3.937') | ф 9.0 mm × 550 mm (0.354" x 1.804') |
| Base Material | IIR | IIR |
| Shore A Hardness | 28 | 28 |
Heat Resistance (100°C/212°F x 2 h) | Pass | Pass |
| Elongation at Break | 400% | 370% |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
To ensure complete protection, apply Sealing Mastic for Fibre Closure KCMFD (tape form) by removing the liner and wrapping the KCMFD around the junction where the outer jacket of the optical or telecom cable meets the splice closure. Then, use Sealing Mastic for Fibre Closure KCMFT (strip form), embed the KCMFT into the grooves to seal the splice closure. Finish by securing and tightening the closure.
