Application Scenarios
Arc-proofing high-energy power cables exposed to arc-fault failures, reducing the risk of transferred arcs. Fireproofing for power cable joints in substations, subways, tunnels, chemical and mining industries, buildings, and more.
Product Performance Table
| Available Model | KCZF-90 |
|---|---|
Dimensions (T x W x L) | 0.70 mm x 60 mm x 5,000 mm (0.028 " x 2.362" x 16.404') |
| Base Material | NBR |
| Tensile Strength | 5.10 MPa |
| Elgonation at Break | 550% |
| Low-Temperature Stretchability | 75% |
| Carbonization Height | 0.9 M (35.433') |
| Oxygen Index | 51% |
| Self-Fusing | No detachment |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
Unroll the Self-Fusing Fireproof Tape KCZF-90 and remove the release liner. Stretch the tape by approximately 20% and wrap in successive 60%-lapped, level-wound layers around the target area. Make two additional turns in place with slight tension at the end of application to allow the tape to self-fuse.
