Application Scenarios
KCTG-102 delivers a close-fitting seal and lasting protection for the exposed ends of cables, pipes, equipment terminals, and other cylindrical surfaces.
Product Performance Table
| Available Model | KCTG-102 |
|---|---|
| Compatible Cable Diameter | 11.6 mm ~ 81.3 mm (0.457" ~ 3.201") |
Diameter After Expansion | 25 mm ~ 100 mm (0.984" ~ 3.937") |
Length After Expansion | 60 mm ~ 100 mm (0.197' ~ 0.328') |
Recovered Wall Thickness | 3.0 mm ~ 4.0 mm (0.118" ~ 0.157") |
| Base Material | EPDM |
| Tensile Strength | 9.0 MPa |
| Elongation at Break | 750% |
| Tear Strength | 30 kN/m |
| Permanent Deformation | 25% |
| Waterproof Rating | IPX7 |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
Position the Ethylene Propylene Diene Terpolymer (EPDM) Cold Shrink Cap KCTG-102 over the installation area, including cable ends, pipe ends, equipment terminal ends, and cylindrical surfaces. To install, pull and unwind the plastic ripcord in a counter-clockwise direction to unravel the spiral support core. This will allow the elasticity of the KCTG-102 to contract and conform into place.
