Application Scenarios
Provides outer armour protection and structural strength for new and existing power cable joints, delivers sheath repair for power and telecom cables, and is suitable for various pipe repairs and protection.
Product Performance Table
| Available Model | KCA-88 |
|---|---|
Dimensions (W x L) | 100 mm x 4,600 mm (3.937' x 15.092') |
| Base Material | Polyurethane |
| Curing Time | 5~12 Min |
| Chemical Resistance | No swelling, delamination, or cracking |
| Tensile Strength | 780 N |
Heat Resistance (100°C/212°F x 2 h) | No delamination, loosening, or cracking |
| Compression Strength | 401 N/10mm |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
Wear gloves and tear open the package along the V-shaped groove. Fill the bag with water at a temperature below 35°C (95°F) to submerge the Armour Tape KCA-88. Knead the bag 3–5 times and drain after 15 seconds. Gently stretch the tape and wrap in successive 60%-lapped, level-wound layers around the target area, avoiding twisting on cone-shaped surfaces.
Note: Preheat KCA-88 to 2°C (36°F) if the ambient is below 2°C (36°F). If above 35°C (95°F), unwrap and use the tape directly.
