Application Scenarios
Apply as insulation, waterproof protection, and repair material to bare overhead conductors, lead wire clamps, busbars, tubular busbars, various joints, towers, and other exposed metal areas up to 10 kV.
Product Performance Table
| Available Model | KCFB-68 |
|---|---|
Dimensions (T x W x L) | 1.8 mm x 90 mm x 600 mm (0.071" x 3.543" x 1.969') |
| Base Material | Silicone |
| Flammability Rating | V1 |
| Dielectric Breakdown Strength | 28 kV |
| Volume Resistivity | 3.4×1014 Ω·cm |
| Shore A Hardness | 42 |
| Tensile Strength (After Curing) | 1.3 MPa |
(Typical Values)
*Dimensions are customizable upon request.Installation Guide
Firstly, clean the application site and remove the thin liner from one side of the Self-Curing Waterproof Insulating Pad KCFB-68. Then, wrap the linerless side around the application area. Press the pad evenly through the unremoved liner to conform to the desired shape. Finally, remove the remaining liner and pinch the ends to ensure a tight, secure seal.
