Application Scenarios
Applied for stress control in spliced tape-wrapped mid-joints rated up to 35 kV.
Product Performance Table
| Available Model | KCYK-31 |
|---|---|
Dimensions (T x W x L) | 0.76 mm x 19 mm x 4,600 mm (0.030" x 0.748" x 15.092') |
| Base Material | NBR |
| Tensile Strength | 9.4 MPa |
| Dielectric Constant (50 Hz) | 18 |
| Dielectric Strength | 23.5 kV/mm |
| Dielectric Loss (50 Hz) | 0.09 |
| Continuous Operating Temperature | 90°C/194°F |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
Avoid stretching the Self-Fusing Stress Control Tape KCYK-31 during application. Apply KCYK-31 in successive half-lapped, level-wound layers that extend 5 mm beyond both ends of the shield break point. Ensure the stress cones at both ends transition smoothly without steps or gaps.
