Application Scenarios
As primary insulation for splicing and repair of solid dielectric insulated cables up to 69 kV, as well as for primary insulation repair in joints and terminations and stress cone construction up to 35 kV. Provides reliable insulation protection for busbars, overhead lead wire, and sheath and jacket repair.
Product Specifications Table
| Available Models | KCJ-23C |
|---|---|
Dimensions (T x W x L) | 0.76 mm x 19 mm x 9,000 mm (0.030" x 0.748" x 29.528') |
| Base Material | EPR |
| Tensile Strength | 1.7 MPa |
| Elongation at Break | 700% |
| Dielectric Strength | 30.0 kV/mm |
| Volume Resistivity | 1 ×1014 Ω·cm |
| Continuous Operating Temperature | 90°C/194°F |
| Emergency Overload Temperature | 130°C/266°F |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
Abrade and clean the application site before wrapping. Stretch the Linerless Self-Fusing Insulating Tape KCJ-23C to twice its original length, and apply it over the target area in successive, half-lapped, level-wound layers.
