Application Scenarios
Provides primary insulation for high-temperature silicone-insulated cables, overwrap protection for high-voltage cables, and insulation with phase colour identification for joints, terminations, and busbars rated up to 35kV. KCSI-30 is also applicable for challenging applications, such as submarine cables, submersible motors, large generators, aero engines, and automobiles.
Product Performance Table
| Available Model | KCSI-30 |
|---|---|
Dimensions (T x W x L) | 0.80 mm x 50 mm x 5,000 mm (0.031" x 1.969" x 16.404') |
| Base Material | Silicone |
| Tensile Strength | 6.5 MPa |
| Elongation at Break | 450% |
| Dielectric Strength | 22 kV/mm |
| Volume Resistivity | 3.3×1014 Ω·cm |
| Continuous Operating Temperature | 90°C/194°F |
(Typical Values)
*Dimensions are customizable upon request.
Installation Guide
Remove the release liner, then stretch the Self-Fusing Arc- and Track-Retardant Silicone Rubber Tape KCSI-30 by approximately 100%. Apply the tape over the target area in successive half-lapped, level-wound layers until the desired thickness is achieved. Press down the ends to prevent lifting.
